# Community Staking Module

**URL:** <https://research.lido.fi/t/community-staking-module/5917>\
**Category:** Proposals\
**Created:** [November 9, 2023, 11:33am UTC](https://research.lido.fi/t/community-staking-module/5917 "2023-11-09T11:33:44Z")\
**Posts on this page:** 1\
**Showing post:** 231

<div class="post-metadata">

**Author:** ![dgusakov](https://dub1.discourse-cdn.com/flex013/user_avatar/research.lido.fi/dgusakov/32/1238_2.png) [@dgusakov](https://research.lido.fi/u/dgusakov)\
**Post date:** [July 23, 2026, 12:38pm UTC](https://research.lido.fi/t/community-staking-module/5917/231 "2026-07-23T12:38:43Z")

</div>

> [@dgusakov](#):
>
> It is proposed to set the following values for the limits in [`UpdateStakingModuleShareLimits.sol`](https://github.com/lidofinance/easy-track/blob/feat/cmv2-srv3-factories/contracts/EVMScriptFactories/UpdateStakingModuleShareLimits.sol):
> 
> - **`maxStakeShareLimitIncrease = 500 BP`**
> - **`maxStakeShareLimitDecrease = 500 BP`**
> - **`maxPriorityExitShareThresholdIncrease = 600 BP`**
> - **`maxPriorityExitShareThresholdDecrease = 600 BP`**
> 
> These values ensure that a single ET motion cannot change the module’s `stakeShareLimit` by more than 0.5% in either direction (increase or decrease).

There is a mistake in the linked post. One can see that `500 BP` is 5% and not 0.5% as stated.

The correct parameter values should be:

- **`maxStakeShareLimitIncrease = 50 BP`** (0.5%)
- **`maxStakeShareLimitDecrease = 50 BP`** (0.5%)
- **`maxPriorityExitShareThresholdIncrease = 60 BP`** (0.6%)
- **`maxPriorityExitShareThresholdDecrease = 60 BP`** (0.6%)

Since the mistake has been left unnoticed till recently, the on-chain [Vote #203](https://dao.lido.fi/vote/203) have already added the new factory ([`0x0C6703F1d8D9DdfB6c6e5F57b4f7432a6500D6D8`](https://etherscan.io/address/0x0C6703F1d8D9DdfB6c6e5F57b4f7432a6500D6D8)) to the Easy Track registry.

Given that, it is proposed to add the following items to the next on-chain vote:

- Remove [`0x0C6703F1d8D9DdfB6c6e5F57b4f7432a6500D6D8`](https://etherscan.io/address/0x0C6703F1d8D9DdfB6c6e5F57b4f7432a6500D6D8) ET factory from the Easy Track registry.
- Add a new instance of `UpdateStakingModuleShareLimits` factory [0xde3e46E3129fA4e4e3f66c9024B0A3Ad509b27a1](https://etherscan.io/address/0xde3e46E3129fA4e4e3f66c9024B0A3Ad509b27a1) with the [unchanged permissions](https://research.lido.fi/t/community-staking-module/5917/228#p-25973-updatestakingmodulesharelimits-1) and with the correct deployemnt parameters to the Easy Track registry.

---

_[View the full topic](https://research.lido.fi/t/community-staking-module/5917)._